Chariot Carriers Corsaire XL, Captain XL manual Assembly, Assembling the reflectors and safety flag

Assembly

Assembling the reflectors and safety flag

If you want to use your Chariot as a Bicycle Trailer, all refl ectors and safety fl ags must be installed.

Exception: If you use tires with refl ective strips, the spoke refl ectors can be left off.

Position a spoke refl ector between two outer spokes and an inner spoke in such a way that the inner spoke lies in the guide slot of the refl ector.

Guide the plastic clip with its slot over the inner spoke into the hole of the refl ector and secure by tightening it a quarter turn using a screwdriver.

Attach two

refl ectors on each wheel (as shown, opposite each other to the right and left of the valve).

For fastening the front and rear refl ectors you need a Philips screwdriver.

Screw the red refl ectors into the rear grommets on the passenger compartment.

Screw the white refl ectors into the front grommets on the passenger compartment.

Push the two safety fl ag rods together and guide the bottom end of the rod through the cord loop at the back left side of the two-in-one weather cover. Push the end of the rod into the sleeve located at the lower left corner of the passenger compartment until it can go no further.

19