Chauvet 3P Important Notes about STAGE 1 Mode, STAGE 1 MODE, Module selection, Strobe, Dmx Mode

Operating Instructions

STAGE 1 MODE 2

CHANNEL

VALUE

FUNCTION

		Module 1
	000  004	No Function
	005  034	Red
	035  064	Green
1	065  094	Blue
	095  124	Yellow
	125  154	Cyan
	155  184	Purple
	185  255	Pink-White

		Module 2
	000  004	No Function
	005  034	Red
	035  064	Green
2	065  094	Blue
	095  124	Yellow
	125  154	Cyan
	155  184	Purple
	185  255	Pink-White

		Module 3
	000  004	No Function
	005  034	Red
	035  064	Green
3	065  094	Blue
	095  124	Yellow
	125  154	Cyan
	155  184	Purple
	185  255	Pink-White
4
5		No Function
6
7
		Strobe
8	000  004	No Function
	005  255	0  20Hz
		Mode Selection
9	000  244	DMX MODE 1 (only when channels 1-7 = 0)
	245  255	DMX MODE 2
10	ID Address	See Channel 10 (ID address selection) on
	Selection	page 16 under DMX Control Mode 1

11

12

No Function

Important Notes about STAGE 1 Mode 2

Module selection

Simplified control of modules using channels 1,2 & 3.

Strobe

Controls the strobe of channels 1, 2 and 3 simultaneously. Speed of the strobe is adjustable from 0 to 20 Hz.

Mode selection

Use channel 9 to switch between DMX mode 1 and DMX mode 2.

ID address selection

Channel 10 selects ID addressed fixtures.

COLORado™ 3P User Manual 22 3/17/2009 9:54 AM