Chauvet 3P user manual Important Notes about Stage 2 Mode

Operating Instructions

Important Notes about Stage 2 Mode 1

Red, Green and Blue Selection

Channels 2, 3 and 4 control overall intensity of each respective color. Channels 2, 3 and 4 can be combined to create an unlimited range of colors.

Strobe

Strobe occurs at every channel with the exception of Channels 7 and 10. Speed of the strobe is adjustable from 0 to 20 Hz.

Mode Selection

Channel 9 values 5-244 provides mode selection and can only be activated while Channels 1 through 7 are at value 0. When channel 9 is between 245 and 255, channels 1 through 7 can be any value.

When Color-Cycle mode 4 is selected channel 9 controls the speed.

ID address selection

Use channel 8 to select ID addressed fixtures.

Each independent DMX address can have up to 66 ID addressed fixtures. ID address “0” allows control of all fixtures simultaneously.

Module selection

Provides individual control of the three LED modules in each fixture. Channel 9 has priority over channel 10.

Effect macro

These are pre-programmed color patterns and module chases.

Channel 10 has priority over channels (1, 2, 3, 4).

Channel 10 has priority over channel 9 if first activated.

COLORado™ 3P User Manual 25 3/17/2009 9:54 AM