Chauvet 3P user manual Activating password mode, Control via external DMX

Operating Instructions

generally used when you add more units to an existing system. Turning off and then on the controller has the same effect.

[Reset to factory settings]

This function will reset all the settings to the factory defaults except for [Custom] programs.

Factory Default Settings

Setting	Default
[Schedule]	All times in schedule are reset to [00:00]
[Wash program]	Step times and fade times are reset to [001]
[Effect program]	Speeds are reset to [001]
[DMX address]	DMX address is reset to [001]
[Range]	Range is reset to [066]
[Allow edit]	Reset to [Yes]
[Password ON/OFF]	Password is reset to [OFF]
[Set password]	Password is reset to [00000000] Down=0, Up=1

Activating password mode

Set [Password] function to [ON]. This will prompt the user for a password every time the controller is powered on.

Toggle to [Set password] function in order to change the password.

Input an 8 digit password using the [UP] & [DOWN] keys. Press the [SET] button to confirm.

Note	In the event that the user forgets the password use the following factory
	password override:
	[UP]  [DOWN]  [UP]  [DOWN]  [UP]  [UP]  [DOWN]  [DOWN]

Control via external DMX

Programs in the controller can be accessed via an external DMX controller. It will be necessary to have the DMX address set on the COLORado Controller. The controller operates on 4 channels of control.

DMX Channel Values

CHANNEL

VALUE

FUNCTION

	000  010	Blackout
	011  030	Wash [1]
	031  040	Blackout
	041  060	Wash [2]
	061  070	Blackout
	071  090	Wash [3]
	091  100	Blackout
1	101  120	Wash [4]
	121  130	Blackout
	131  150	Wash [5]
	151  160	Blackout
	161  180	Wash [6]
	181  190	Blackout
	191  210	Wash [7]
	211  220	Blackout
	221  255	Wash [8]
	000  010	Blackout
	011  030	Effect [1]
	031  040	Blackout
2	041  060	Effect [2]
	061  070	Blackout
	071  090	Effect [3]
	091  100	Blackout
	101  120	Effect [4]

COLORado™ 3P User Manual 31 3/17/2009 9:54 AM