Setup
Setting up a DMX Serial Data Link
Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the controller.
Connect the end of the cable coming from the controller which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
Then, proceed to connect from the output as stated above to the input of the following fixture and so on.
CHAUVET Certified DMX Data Cables
Order Code | Description |
DMX1.5 | DMX Cable 1.5m/4.9ft |
DMX4.5 | DMX Cable 4.5m/14.8ft |
DMX10 | DMX Cable 10m/32.8ft |
Universal DMX Controller
This drawing provides a general illustration of the DMX Input/Output panel of a lighting fixture.
Continue the link
COLORado™ 3P User Manual | 13 | 3/17/2009 9:54 AM |
