Chauvet 3P Safety Instructions, LED Expected Lifespan, usage and maintenance of this product

Before You Begin

Safety Instructions

Please read these instructions carefully, which

includes important information about the installation,

usage and maintenance of this product.

	Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
	they also receive this instruction booklet.
	Always make sure that you are connecting to the proper voltage, and that the line voltage you are
	connecting to is not higher than that stated on the decal or rear panel of the fixture.
	Make sure there are no flammable materials close to the unit while operating.
	Always disconnect from power source before servicing or replacing fuse and be sure to replace with
	same fuse source.
	Secure fixture to fastening device using a safety chain.
	Maximum ambient temperature (Ta) is 95°F (35°C). Do not operate fixture at temperatures higher
	than this.
	In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
	unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
	contact the nearest authorized technical assistance center. Always use the same type spare parts.
	Don’t connect the device to a dimmer pack.
	Make sure the power cord is never crimped or damaged.
	Never disconnect the power cord by pulling or tugging on the cord.
	Avoid direct eye exposure to the light source while it is on.
	Do not daisy chain power to more than 23 units.
Caution!	There are no user serviceable parts inside the unit. Do not open the housing or
	attempt any repairs yourself. In the unlikely event your unit may require service,
	please contact CHAUVET at: 954-929-1115.

LED Expected Lifespan

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000 hours will be achieved under normal operational conditions. If improving on this lifespan expectancy is of a higher priority, place care in providing for lower operational temperatures. This may include climatic-environmental and the reduction of overall projection intensity.

COLORado™ 3P User Manual 5 3/17/2009 9:54 AM