Operation
Product Settings
Pan/Tilt Speed 1. Select SETTINGS > PERFORM > PT SPEED.
a.Select FAST for fast movement or SLOW to use the normal speed.
b.Press <ENTER>.
Reverse Pan Direction 1. Select SETTINGS > PERFORM > PAN INV.
2.To reverse the pan direction, press <ENTER>.
a.Select INVERT to reverse the pan direction or NORM to use the normal pan direction.
b.Press <ENTER>.
Reverse Tilt Direction 1. Select SETTINGS > PERFORM > TILT INV.
2.To reverse the tilt direction, press <ENTER>.
a.Select INVERT to reverse the tilt direction or NORM to use the normal tilt direction.
b.Press <ENTER>.
Reverse Dimmer Direction 1. Select SETTINGS > PERFORM > DIM INV.
2.To reverse the dimmer direction, press <ENTER>.
a.Select INVERT to reverse the dimmer direction or NORM to use the normal dimmer direction.
b.Press <ENTER>.
Optics Speed 3. Select SETTINGS > PERFORM > OP SPEED.
a.Select FAST for fast movement or SLOW to use the normal speed.
b.Press <ENTER>.
Head Motion Black Out 1. Select SETTINGS > PERFORM > BLACK D.
2.To black out the output when the head moves, press <ENTER>.
a.Select INSTANT to black out the output when the head tilts or pans, or DELAY to keep the output on while the head moves.
b.Press <ENTER>.
Dimmer Curve 1. Select SETTINGS > PERFORM > DIMMER.
2.To set the dimming curve, press <ENTER>.
a.Select DIM4 (slowest) to DIM1 (Fastest) or OFF (linear).
b.Accept the selected option.
Loss Of Signal 1. Select SETTINGS > PERFORM > DMXERROR.
2.To choose what happens to the product when signal is lost, press <ENTER>.
a.Select BLACK to black out the output during signal loss or SAVE to keep the last output when the signal was lost.
b.Press <ENTER>.
Product Reset 1. Select SETTINGS > PERFORM > DMXRESET.
2.To choose whether to reset the product from the control panel or the DMX controller, press <ENTER>.
a.Select DMX to reset the product from a DMX controller or DISPLAY to reset the product from the control panel.
b.Press <ENTER>.
Display Backlight 1. Select SETTINGS > PERFORM > DISPLAY.
2.To choose how long the backlight stays on after the last action is performed on the control panel, press <ENTER>.
a.Select LONG, SHORT, or ALWAYS.
b.Press <ENTER>.
12 |
