Chauvet 460-LED user manual Operation, Control Panel Description Control Options, Button Function

Operation

4. Operation

Control Panel

Description

Control Options

Programming

Navigation Buttons

DMX Address

DMX Mode

Button	Function
<MENU>	Exits from the current menu or function
<ENTER>	Enables the currently displayed menu or sets the currently
	selected value in to the current function
<UP>	Navigates upward through the menu list and increases the
	numeric value when in a function
<DOWN>	Navigates downward through the menu list and decreases the
	numeric value when in a function

You can set the Q-Spot™ 460-LED start address in the 001~512 DMX range. This allows for the control of up to 36 products in the 14-channel PERSON1 mode. The Q- Spot™ 460-LED works with any compatible DMX controller using standard DMX cables.

Carry out all the programming procedures indicated below from the control panel. Refer to the Menu Map page to learn how the menu options relate to each other

·To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will take you to the first programming level for that option.

·To select an option or value within the current programming level, press <UP> or <DOWN> until the option shows on the display. Press <ENTER> to select. If there is another programming level, you will see the next option or you will see the selected value.

·To exit to the previous menu level, press <MENU>.

1.Select ADDRESS.

2.To change the current address, press <ENTER>.

a.Change the starting address (001~512).

b.Press <ENTER>.

1.Select PERSON.

2.To change the current mode, press <ENTER>.

a.Select a DMX mode (PERSON1/PERSON2).

b.Press <ENTER>.

Q-Spot™ 460-LED User Manual Rev. 5 11