Chauvet Setting the DMX starting address, Legend 550 Troubleshooting, Technical Support

Models: 550

1 26
Download 26 pages 23.87 Kb
Page 23
Image 23
Setting the DMX starting address

Setting the DMX starting address

This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start address" from 1 ~ 512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that uses 6 DMX channels and was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose start addresses so that the channels used do not overlap, and note the start address selected for future reference.

If this is your first time addressing a fixture using the DMX control protocol, we suggest jumping to the “Appendix” section and reading the heading “DMX Primer”. It contains very useful information that will help you understand its use.

Legend™ 550 Troubleshooting

Symptom

Solution(s)

Auto shut off

Check fan thermal switch reset

 

 

Beam is very dim or not bright

Clean optical system or replace lamp

Check voltage switch for proper setting

 

 

 

Breaker/Fuse keeps blowing

Check total load placed on device

 

 

Device has no power

Check for power on Mains.

Check device’s fuse. (internal and/or external)

 

Fixture is not responding

Check Display settings for correct addressing

Check DMX cables

 

 

 

Lamps cuts off sporadically

Possible bad lamp or fixture is overheating.

Lamp may be at end of its life.

 

 

 

Light will not come on after power

Discharge lamps require a cooling off period before the electronics in the

failure

fixture can kick start it again, wait 5 ~ 10 minutes before powering up.

 

 

 

Use only DMX cables

Loss of signal

Install terminator

 

Note: Keep DMX cables separated from power cables or black lights.

Moves slowly

Check FasTap™

 

 

No light output

Check lamp

 

 

Stand alone mode

This fixture features stand-alone functions. See “Menu Map” for details.

 

 

If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location listed below.

Technical Support

Address: Service Dept.

3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.) Support (Email): tech@chauvetlighting.com Telephone: (954) 929-1115 - (Press 4)

Fax: (954) 929-5560 - (Attention: Service)

Website: http://www.chauvetlighting.com

Legend™ 550 Spot User Manual

23

1/11/2010 11:36 AM

Page 23
Image 23
Chauvet user manual Setting the DMX starting address, Legend 550 Troubleshooting, Technical Support, Symptom, Solutions