Operation
-16- Q-Wash 560Z-LED User Manual Rev. 12
Menu Map
1
st
Level 2
nd
Level 3
rd
Level Description
INTRO
ADDRESS 001~512 Selects a starting DMX address
RESET NO/YES Resets the product’s custom settings
FAN
HIGH Select the fan’s operation mode.
NOTE: The fan will go to High mode if the product’s
internal temperature becomes too high, despite any
manual or DMX setting
NORMAL
LOW
A
UTO
RUN
DMX512 Selects DMX running mode
A
UTO 1 Selects the first automatic program
A
UTO 2 Selects the second automatic program
CUSTOM Selects the user customizable program
SLAVE Selects the Slave running mode
TEST Starts the product’s test sequence
CHANNELS BASIC Selects the 11-channel DMX mode
A
DVANCED Selects the 15-channel DMX mode
G1 Selects the 15-channel DMX mode
DISPLAY 60 CLOSE Turns off the display after 60 seconds
BRIGHT Keeps the display on
KEYLOCK NO/YES Activates/deactivates the control panel password
DIMMER DIMMER4~1 Slow (DIMMER4) to fast (DIMMER1) dimmer curves
DIMMER0 Linear dimmer
INFO EDITION Shows the version of the installed S/W
INVERT
PAN NORMAL/
REVERSE
Defines the direction of the pan fader
TILT Defines the direction of the tilt fader
DIMMER Defines the direction of the dimmer fader
USE NO/YES Activates the changes
RANGE
P/START
000~255
Sets the pan start point (restricted range)
P/FINISH Sets the pan end point (restricted range)
T/START Sets the tilt start point (restricted range)
T/FINISH Sets the tilt end point (restricted range)
USE Activates the changes
SPECIAL
BLACKD NO/YES Activates the move-in black delay (3 s)
RESET DMX The DMX controller can reset the product
SYSTEM The control panel can reset the product
POWER NORMAL/
HIGH
LEDs illuminate at normal or high intensity
NOTE: The product will return to Normal if the LEDs’
temperature becomes too high
COLOR UC RGBW = 255: The output matches that of older products
RGBTOW RGBW = 255: The RGBW output is set by RGB-W
OFF RGBW = 255: The RGBW output is maximum
FAN DMX The DMX controller can set the fan speed
SYSTEM The control panel can reset the fan speed
EDIT
STEP
000~255
Selects the program step
PAN Selects the pan position
TILT Selects the tilt position
SPEED Selects the pan/tilt speed
RED
Combines red, green, blue, white, and amber to obtain a
custom color
GREEN
BLUE
WHITE
AMBER
Continues on the next page