![](/images/new-backgrounds/1191167/19116713x1.webp)
|
|
| Before You Begin |
|
|
|
|
| Safety Notes |
| Read all the following Safety Notes before working with this product. These Notes include |
|
|
| important information about the installation, usage, and maintenance of this product. |
|
|
|
|
There are no user serviceable parts in this product. Any reference to servicing in this User Manual applies only to properly certified CHAUVET® technicians. Do not open the housing or attempt any repairs unless you are certified.
Please refer to all applicable local codes and regulations for proper installation of this product.
Personal Safety
Mounting and Rigging
Power and Wiring
Operation
Expected LED Lifespan
∙Avoid direct eye exposure to the light source while the product is on.
∙Always disconnect this product from its power source before servicing.
∙Always connect this product to a grounded circuit to avoid the risk of electrocution.
∙Do not touch this product’s housing when operating because it may be hot.
∙This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture.
∙Make sure there are no flammable materials close to this product while operating.
∙When hanging this product, always secure it to a fastening device using a safety cable (included).
∙Do not carry this product from the head; always use the handles.
∙Always make sure you are connecting this product to the proper voltage, as per the specifications in this manual or on the product’s specification label.
∙Never connect this product to a dimmer pack or rheostat.
∙Never disconnect this product by pulling or tugging on the power cable.
∙Do not operate this product if you see damage on the housing, lenses, or cables. Have the damaged parts replaced by an authorized technician at once.
∙Do not cover the ventilation slots when operating to avoid internal overheating.
∙The maximum ambient temperature is 104° F (40° C). Do not operate this product at a higher temperature.
∙In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, please contact CHAUVET® Technical Support.
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions. For this reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be of 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operational temperature by improving the product’s ventilation and reducing the external temperature. In addition, limiting the overall projection intensity may also help to extend the LEDs’ lifespan.