7.To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately.
Save these instructions.
Grounding
To prevent electric shock and death from
incorrect grounding wire connection:
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Double Insulated Tools: Tools with Two
Prong Plugs
Outlets for
1.Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies
OSHA requirements and complies with
the applicable standards of Underwriters
REV 10e
Laboratories, Inc., the Canadian
Standard Association, and the National
Electrical Code.
2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for
Extension Cords
Note: Extension cords must not be used with this item’s charger.
|
|
|
|
|
| Symbology | |
|
| ||
| Double Insulated | ||
|
| ||
| Canadian Standards Association | ||
|
| ||
| Underwriters Laboratories, Inc. | ||
|
| ||
V~ | Volts Alternating Current | ||
A | Amperes | ||
| |||
|
| ||
n0 xxxx/min. | No Load Revolutions per Minute | ||
(RPM) | |||
SKU 92880 | For technical questions, please call | Page 7 |
