
processes) can result in eye, skin and breathing irritation. Always use a NIOSH (National Institute for Occupational Safety and Health) approved respirator and safety goggles. Avoid skin exposure.
24.People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
25.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
26.The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Grinding Wheel Warnings
1.Do not use a grinding wheel if it is chipped, cracked, or worn. You can check if the wheel has cracks not visible to the human eye by hanging it up by the central hole and tapping it with
a nonmetallic object (ie: screwdriver handle). If it is in good condition it will produce a metallic sound. A dull sound indicates a crack or break.
2.Only use grinding wheels that fit the
Arbor (7/8”). Do not try to change or modify the mounting hole on a grinding
wheel to make it fit. Grinding wheel
REV 09b
replacements are available at Harbor Freight Tools.
3.Do not overtighten the Grinder Lock Cap
(9). Hand tighten it only. Overtightening may cause the wheel to break or disintegrate.
4.Never use the Chainsaw Sharpener without the Grinding Wheel Cover (11B) in place.
5.Always test the Grinding Wheel (8) by running it for a minute prior to contact with a chain.
6.Keep away from the wheel when it is turning, and make sure no one is standing close, in the line of the wheel rotation trajectory.
7.If the grinding wheel vibrates, turn off the machine immediately and check that it is mounted securely, and that is not damaged.
8.Never try to stop the grinding wheel with your hands, even if you are wearing safety gloves. The wheel will cut through gloves and your hand, causing serious injury.
9.Never operate tool without the Grinding Wheel Cover in place.
10.Replacement grinding wheel listed speed must meet or exceed RPM rating of the tool.
11.Use only flanges furnished with the tool.
12.This machine is designed to sharpen chainsaw chains. Do not attempt to sharpen any other tools, and do not attempt to grind any other objects.
SKU 93213 | For technical questions, please call | Page 4 |