Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Release the Trigger and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
2.After Use, wipe external surfaces of the tool with clean cloth.
3.Breaker Hammer will cease operation once Carbon Brushes are worn. Check Brushes every 100 hours and, when necessary, replace them.
4.Wipe tool with a
5.Add a drop or two of a lightweight oil to the Trigger assembly area to lubricate the Trigger (86).
6.Examine the tool before each use. Make sure the Chisel is sharp and not dull
or cracked. Replace worn or broken Chisels with approved replacement Chisels from Harbor Freight Tools.
7.Store in temperatures no lower than 50-
60° F.
8.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
Page 16 | For technical questions, please call | SKU 96035 |
