Figure 3
Left Handle
(92)
Nut (91)
Figure 6
3.Use a Wrench to loosen the Nut (91) holding the Left Handle (92) in place.
See Figure 6.
Figure 7
Spline Axle (27)
Left Handle
(92)
Screws (25)
Gearbox (23)
Figure 8
5.Remove the four Screws (25) from the side of the Gearbox 23. See Figure 8.
Wire Board
(50)
Screw (52)
Figure 9
4. CAUTION: When removing Left Handle, 6. | Slide Gearbox open so that Wire Board |
do not pull too far from Spline Axle (27) | (50) is visible. Use screwdriver (not |
Only wiggle loose until partially off. See | included) to loosen Screw (52) from Wire |
Figure 7. | Fixing Board. See Figure 9. |
Page 14 | For technical questions, please call | SKU 96035 |
