Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
General operating instructions
1.Turn the Power Switch of the tool to the “OFF” position and unplug the tool from the electrical outlet before assembling or making any adjustments to the tool.
2.Maintain a proper grip on the Pole Saw whenever it is running. Hold the tool with both hands. Always keep your left hand on the Front Handle (61) and your right hand on the Rear Handle (74, 86), so that your body is to the left of the Pole Saw. Never use a
3.Always wear the Shoulder Strap (66) to properly support the Pole Saw when moving or using unit.
4.To activate the Saw, push the Safety Switch (72) forward and depress the Power
| Switch (75). | Safety Switch (72) |
|
| |
5. | Allow the Saw Chain to cut for you. | Power |
| Exert only light downward pressure. If | |
| Switch | |
| you attempt to force the cut, damage | |
| (75) | |
| to the Guard Bar, Chain, or Motor can |
|
| result. |
|
6. | Do not use a back and forth sawing | Power |
| type motion for cutting. | |
| Cord | |
|
| |
7. | Release the Power Switch as soon | (88) |
|
as the cut is completed. Running
the Pole Saw for long periods without a pause can cause unnecessary wear or damage to the Guard Bar, Chain, and Motor.
Beware Kickback! Never cut with tip of blade.
.Cut longer branches down in sections for greater efficiency and safety.
(See example below.)
SKU 96405 | For technical questions, please call | Page 13 |
