can cause serious personal injury and/or property damage.
7.Do not allow the bit to stop while in the hole. Remove the bit while it is still rotating. If the bit stops while in the hole, do not restart the Rotary Hammer. Remove the bit from the Hammer, and then remove the bit from the workpiece.
8.Always keep the Power Cord (112) and extension cord (if used) away from the moving parts of the Rotary Hammer.
9.Avoid unintentional starting. Prepare to begin work before turning on the tool.
10.Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.
11.When using a handheld power tool, hold the tool with both hands to resist starting torque.
12.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
13.This product is not a toy. Keep it out of reach of children.
14.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:
•Avoid operating alone.
•Do not use with power switch locked on.
•Properly maintain and inspect to avoid electrical shock.
•Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
15.Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•Lead from
•Crystalline silica from bricks and cement or other masonry products
•Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)
16.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SKU 97743 | For technical questions, please call | Page 5 |
