check that the saw teeth are not en- gaged into the workpiece before turn- ing on the saw.
•Push the wood stock past the blade prior to release.
11.Check guards for proper operation with saw disconnected from power before each use. Do not disable any guard. Do not operate saw if any movable guard does not move freely and close instantly. Make sure any movable guard does not touch the blade in all angles, depths of cut, and positions.
12.Keep the guard in place while through- sawing. Verify that the spreader lines up with the blade to prevent binding.
13.Construct an appropriate Push Stick out of wood according to the guidelines on the following page.
Page 6 | For technical questions, please call | SKU 98265 |
