Battery Temperature Warning: | Transformer (24) |
WARNING: Battery explosion may cause serious |
|
personal or property injury including death. Charge the |
|
battery only within a 50° to 100° temperature range. |
|
Lower temperatures may inhibit charging. Higher |
|
temperatures increase chance of battery failure, |
|
including explosion. |
|
2.Charge the battery pack only with the included Charger Base (25). Use of other chargers may cause battery failure including explosion.
3.Ensure that the Charger Base (25) is connected to a circuit breaker protected 120 VAC, 60 Hz power supply only.
4.Connect the Charger Base to the Transformer (24), by plugging it in as shown in the photo. Plug the Transformer (24) into a 120 VAC wall outlet.
5.Insert the battery pack into the Charger Base (25) by aligning the ribs on the battery pack with the grooves in the battery pack. Press the battery pack into place.
NOTE: The Battery has Release Tabs (19) on both sides. Press these in to release the battery from the Rotary Tool or from the Battery Charger Base (25).
6.Press down on the battery pack to make sure that the contacts on the battery pack are fully engaged with the contacts in the charger unit.
7.While being charged, the green LED will be lit, indicating that the charger is in operation. During recharging, the battery pack will become slightly warm to the touch. This is normal and not a cause for concern.
8.Do not place the battery and charger in an environment of extreme heat or cold. They will work best at room temperature.
9.Note: The Charger Base (25) will not shut off automatically. When the battery is fully charged (after 3 to
(25) indefinitely.
REV 07h
SKU 92880 For technical questions please call | Page |
