Chicago Pneumatic SD25 user manual Specifications and Parts

User’s Manual

Specifications and Parts

This section lists the specifications of your SD25 Series screwdrivers under typical operating conditions and available screwdriver-to-controller cables.

Specifications

This section lists general specifications, torque and RPM ranges, and length and weight ranges for SD25 Series screwdrivers.

General Specifications for SD25 Series Screwdrivers

Description	Specifications
Motor current	8A peak
Motor commutation	Hall-based, brushless DC motor
Screwdriver logic power	24 VDC
Screwdriver pushbuttons*	Start, direction, auxiliary, push-to-start
Screwdriver connector	High density 26-pin connector
Screwdriver Display	Three indicator / status LEDs for torque/angle
Screwdriver Headlights	Turn on when screwdriver is running in forward or reverse
Ambient operating temperature	0✘ to 60✘ C (32✘ to 140✘ F)
Relative humidity	0 to 85% R.H. (non-condensing)

* Not available on fixtured screwdrivers

Torque, RPM, Length and Weight Ranges of SD25 Series Screwdrivers

Screwdriver		Torque Range
					RPM Range	Length Range	Weight Range
Type	Nm	lbf-in	ozf-in	kgfcm
In-line	1.1	10	160	11.5	1700	9.4 in / 239 mm	0.91 lb / 0.41 kg
In-line	3.3	20	320	23.0	1100	9.4 in / 239 mm	0.91 lb / 0.41 kg
In-line	3.9	35	560	40.3	800	9.4 in / 239 mm	0.91 lb / 0.41 kg
In-line	5.6	50	800	57.6	500	9.6 in / 244 mm	1.1 lb / 0.49 kg

December 2005 Page 25