![](/images/new-backgrounds/1286081/28608123x1.webp)
HEAD SUPPORT
Use head support to provide additional support for a young infants head.
aHead support can be used with or without newborn insert.
bTo Install Head Support, pull Fastener Tabs through slots and then attach together on underside of carrier.
Fastener Tabs must always connect through slots ABOVE the slots used for harness.
a
b
CARRIER/BASE ATTACHMENT
1 To secure carrier to base, | 1 |
align carrier with base and push firmly into base. Listen for a click.
Pull up on Carrier to verify that it is securely latched.
2 To release carrier from base,
pull release handle while lifting | 2 | |
carrier out of base. | ||
|
Be sure to hold carrier securely with both hands when removing.
NEVER use head support with harness in upper slots. Head support could interfere with harness adjustment.
22 | 23 |