Installation Instructions | |
|
|
|
|
IMPORTANT WARNINGS AND PRECAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- sponding instructions.
•WARNING:Improper installation can result in serious personal injury! Make sure that the mounting surface can sup- port a redundant weight factor five times the total weight of the equipment. If not, reinforce the structure before installing the
•WARNING:Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
•WARNING:The installer is responsible for verifying that the surface to which the
•WARNING:The weight of the display placed on the
•WARNING:Watch for pinch points. Do not put your fingers between movable parts.
•WARNING:Make sure the mount and brackets are correctly oriented.
•CAUTION: Check the unit for shipping damage before you begin the installation.
•CAUTION: Overtightening adjustment bolt will cause excessive wear and may distort adjustment components.
NOTE: Hardware for attaching this unit to the mounting surface is not supplied.
TOOLS REQUIRED FOR INSTALLATION
• | Phillips screw driver |
|
• | Electric drill motor |
|
• | 1/4” Drill bit |
|
NOTE: Other tools may be required depending on the |
| |
| method of installing the mount. |
|
CONTENTS |
| |
DIMENSIONAL DRAWING | 2 | |
INSPECT THE UNIT BEFORE INSTALLING | 3 | |
PARTS | 4 | |
5 | ||
MOUNT THE DISPLAY | 5 | |
ADJUSTMENTS | 6 | |
CABLE MANAGEMENT | 7 |
1