Manuals / Chief Manufacturing / Household Appliance / Indoor Furnishings

Chief Manufacturing FSD-4100 installation instructions Inspect The Unit Before Installing

Models: FSD-4100

1 11

Page 4

Installation Instructions	FSD-4100

INSPECT THE UNIT BEFORE INSTALLING

WARNING: Watch for pinch points. Do not put your fingers between movable parts.

1.Carefully inspect the FSD-4100 for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the installation until the carrier has reviewed the damage.

NOTE: Read all instructions before starting installation.

2.Lay out components to ensure you have all the required parts before proceeding (see “DIMENSIONAL DRAWING” on page 2 and “PARTS” on page 4).

Page 4

Image 4

Chief Manufacturing FSD-4100 installation instructions Inspect The Unit Before Installing

Contents

BEFORE YOU BEGIN CHIEF MANUFACTURING INCFSD-4100 LCD Flat Screen Swing-DownMount I N S T A L L A T I O N I N S T R U C T I O N STOOLS REQUIRED FOR INSTALLATION IMPORTANT WARNINGS AND PRECAUTIONSCONTENTS Installation Instructions DIMENSIONAL DRAWINGFSD-4100 INSPECT THE UNIT BEFORE INSTALLING PARTS FSD-4100INSTALLATION MOUNT THE DISPLAYBase CoverScrews Figure 1. Remove Cover Mark Hole Locations Figure 2. Mark Mounting Location SecureADJUSTMENTS Screen Height AdjustmentArm Tension Adjustment Tension Adjustment BoltCABLE MANAGEMENT Figure 6. Cable Management CoverFigure 7. Route Cables Down Arm Tie Wraps Figure 8. Route & Tie Wrap Cables ArmFigure 10. Install Base and Cable Covers Right and Left 35 Degree Rotation35 Degrees Stop Tie Wrap Slot Figure 9. Route & Tie Wrap Cables BaseRight and Left 110 Degree Rotation 35 Degree Stop Figure 11. Remove 35 Degree Stop110 Degrees Figure 12. Rotate 110 Degrees Figure 13. Wrap Cables In BaseFigure 14. Rotate In One Direction Check RotationFigure 15. Rotate In Opposite Direction