Manuals / Chief Manufacturing / Household Appliance / Indoor Furnishings

Chief Manufacturing FSD-4100 Cable Management Cover, Route Cables Down Arm Tie Wraps

Models: FSD-4100

1 11

Page 8

Installation Instructions	FSD-4100

CABLE MANAGEMENT

1.Remove screw and cable management cover (10B) (see Figure 6).

2.Route the power/audio/video cables down the arm (see Figure 7).

3.Route the power/audio/video cables through the slot in the bot- tom of the arm (see Figure 8).

4.Secure the power/audio/video cables using tie wraps.

5.Proceed to “Right and Left 35 Degree Rotation” on page 8 or “Right and Left 110 Degree Rotation” on page 9, depending upon your application.

Cable

Management

Cover

Figure 6. Cable Management Cover

Figure 7. Route Cables Down Arm

Tie Wraps

Figure 8. Route & Tie Wrap Cables (Arm)

Page 8

Image 8

Chief Manufacturing FSD-4100 Cable Management Cover, Route Cables Down Arm Tie Wraps, Route & Tie Wrap Cables Arm

Contents

BEFORE YOU BEGIN CHIEF MANUFACTURING INCFSD-4100 LCD Flat Screen Swing-DownMount I N S T A L L A T I O N I N S T R U C T I O N SCONTENTS IMPORTANT WARNINGS AND PRECAUTIONSTOOLS REQUIRED FOR INSTALLATION FSD-4100 DIMENSIONAL DRAWINGInstallation Instructions INSPECT THE UNIT BEFORE INSTALLING PARTS FSD-4100INSTALLATION MOUNT THE DISPLAYBase CoverScrews Figure 1. Remove Cover Mark Hole Locations Figure 2. Mark Mounting Location SecureADJUSTMENTS Screen Height AdjustmentArm Tension Adjustment Tension Adjustment BoltCABLE MANAGEMENT Figure 6. Cable Management CoverFigure 7. Route Cables Down Arm Tie Wraps Figure 8. Route & Tie Wrap Cables ArmFigure 10. Install Base and Cable Covers Right and Left 35 Degree Rotation35 Degrees Stop Tie Wrap Slot Figure 9. Route & Tie Wrap Cables BaseRight and Left 110 Degree Rotation 35 Degree Stop Figure 11. Remove 35 Degree Stop110 Degrees Figure 12. Rotate 110 Degrees Figure 13. Wrap Cables In BaseFigure 15. Rotate In Opposite Direction Check RotationFigure 14. Rotate In One Direction