MIWRF SERIES | Installation Instructions |
| (F1) x4 | (F2) x4 |
(A) x1 | 9 |
|
| 9 |
|
Cover and Trim Installation
Cover Installation
To install covers:
1.Install upper and lower wall channel covers (E) by tipping cover top down and positioning as shown in end view of figure below. (See Figure 8)
2.Tap firmly across bottom of channels to lock in place as shown in figure below. (See Figure 8)
3.Install four R.H. and L.H. end caps (D) by aligning tabs on end caps (F) with slots in wall channel covers (E) and sliding tabs in until end caps (D) are flush with wall channel covers
(E). (See Figure 8)
Figure 7
2 | (E) x 2 |
|
|
| |
| (D) x 4 |
|
1 |
|
|
| 2 | 1 |
|
| |
1 |
| 2 |
Figure 8
6
