Installation Instructions | PLP Series |
! IMPORTANT: If the installation of this product requires OSHPD seismic approval, refer to OSHPD
BEFORE YOU BEGIN
CAUTION: To prevent damage to your monitor and PLP, which could affect or void the Factory warranty, thoroughly study all instructions and illustrations before you begin to install the mount. Pay particular attention to the Warnings and Cautions in this document.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the PLP Series wall mount is 200 lbs (90.72kg).
If you have any questions about this installation, contact Chief Manufacturing at
IMPORTANT WARNINGS and CAUTIONS!
WARNING | A WARNING alerts you to the possibility of serious injury or death if you do not |
| follow the instructions. |
|
|
CAUTION | A CAUTION alerts you to the possibility of damage or destruction of equipment if you do |
| not follow the corresponding instructions. |
|
|
WARNING | Improper installation can result in serious personal injury! Make sure that the |
| structural members can support a redundant weight factor five times the total weight |
| of the equipment. If not, reinforce the structure before installing the mount. |
|
|
WARNING | Be aware of the potential for personal injury or damage to the equipment if it is not |
| installed correctly. Consider the weight of the mount without the display. |
|
|
WARNING | The installer is responsible for verifying that the display to which the wall mount is |
| fastened will safely support the combined load of all attached components or other |
| equipment. |
|
|
WARNING | The combined weight of the display placed on the wall mount must not exceed 200 lbs |
| (90.72kg), the maximum support weight of the mount. |
|
|
WARNING | Watch for pinch points. Do not put your fingers between movable parts. |
|
|
WARNING | Make sure the flag securing the display is completely lowered at all times except when |
| removing or installing the display. The flag must be all the way down when |
| installing/removing cables. |
CAUTION Check the unit for shipping damage before you begin the installation.
2