Chief Manufacturing PLP Series Dimensional Drawing, Installation Instructions

Models: PLP Series

1 8

Page 3

Installation Instructions

PLP Series

DRAWING

26.00

TOP MOUNTING BUTTON ON

PSB-XXXX DRAWING GOES HERE

24.00

16.00

1.83

FACE TILTS 15 DOWN

7 UP (FOR SERVICE)

NOTE: CUSTOM INTERFACE BRACKET

NOT SHOWN. THE CUSTOM INTERFACE

BRACKET NEEDED FOR YOUR DISPLAY

WILL ADD BETWEEN 1/2" AND 2" IN DEPTH

AND MAY AFFECT LOCATION OF DISPLAY

ON THE MOUNT.

SEE PSB-XXXX DRAWING ALSO.

5/16" x 1" SLOT

5/16" x 6" SLOT

5/16" x 1" SLOT

Image 3

Contents

CHIEF MANUFACTURING INC I N S T A L L A T I O N I N S T R U C T I O N SPLP Series Wall Mount not follow the corresponding instructions 90.72kg, the maximum support weight of the mountinstalling/removing cables follow the instructionsDIMENSIONAL DRAWING Installation InstructionsPLP Series Table 1. Parts List CONTENTSTOOLS REQUIRED FOR INSTALLATION PARTS LISTFigure 3. Wood Studs 16”Apart on Center PLP INSTALLATIONSelect Mounting Location Figure 2. Use Triangular Hole to Hang the MountOption A PLP INSTALLATION Cont’dMount the PLP Figure 5. Mounting Holes - 16” Apart on CenterREMOVE THE DISPLAY INSTALL THE DISPLAYFigure 8. Install the Display ATTACH PSB TO THE DISPLAYFigure 10. Tilt Display Down TILT ADJUSTMENTCABLE CONNECTION Figure 11. Tilt Display Up for service only