Installation Instructions

PLP Series

PLP INSTALLATION

Perform the following procedures to mount the PLP.

Select Mounting Location

To select the mounting location, do the following:

WARNING: It is the responsibility of the installer to verify that the wall to which the mount is anchored will safely support the combined load of all attached components and equipment.

1.Determine the exact mounting location to install the wall mount prior to installation, keeping in mind the screen size.

NOTE: Mount the PLP on dual wall studs or some other equivalent supporting framework that is vertical or horizontal.

2.Using a stud sensor, locate the two wood studs where you will mount the PLP as follows:

￿Refer to Figure 3 for wood studs that are 16” apart on center.

OR

￿Refer to Figure 4 for wood studs that are 24” apart on center.

3.Using a nail as a temporary hook, hang the mount on the wall using the triangular hole located in the center of the mount (see Figure 2).

4.Use a pencil to mark the mounting holes where the four pilot holes will be drilled into the center of the wood stud. Make sure the mounting holes are square and straight. Remove the mount from the wall, placing it on the floor or a table.

5.Drill pilot holes using a 7/32” drill.

Hang the mount on the wall temporarily using a nail in the center hole. Level the mount before drilling pilot holes.

Figure 2. Use Triangular Hole to Hang the Mount

Wood Studs

16”

Wall

Pilot Holes

 

Pilot Holes

Figure 3. Wood Studs 16”Apart on Center

Wood Studs

24”

Wall

Pilot Holes

 

Pilot Holes

Figure 4. Wood Studs 24”Apart on Center

5

Page 4 Page 6
Page 5
Image 5
Chief Manufacturing PLP Series installation instructions PLP Installation, Select Mounting Location
Page 4 Page 6

PLP Series specifications

The Chief Manufacturing PLP Series represents a cutting-edge solution in the realm of display mounting and installation. This series is designed primarily for professional AV applications, offering an array of innovative features that ensure flexibility, stability, and ease of use. With a commitment to quality and functionality, the PLP Series encompasses a range of mounting solutions suitable for various environments, including corporate settings, educational facilities, and retail spaces.

One of the standout features of the PLP Series is its robust construction. Built with high-strength materials, these mounts provide exceptional durability while maintaining a lightweight design, making installations straightforward and efficient. The PLP Series is designed to accommodate various display sizes and weights, ensuring compatibility with a wide range of flat panel screens.

The PLP Series also incorporates advanced technologies such as the Achieve™ technology. This feature simplifies the installation process significantly, allowing for quick adjustments and precise alignment. Users can easily fine-tune the position of their displays, ensuring that they achieve the optimal viewing angles necessary for engaging presentations or immersive experiences.

In terms of adjustability, the PLP Series offers tilt, swivel, and roll functionalities. This flexibility allows users to adapt their displays for various viewing environments, catering to different audience needs. Moreover, the built-in cable management system ensures that all power and signal cables are neatly organized and hidden, maintaining a clean and professional appearance.

Another noteworthy characteristic of the PLP Series is its intuitive design, which promotes ease of use. Whether it's an AV professional or a facility manager, the PLP Series makes the mounting process accessible to all users, reducing the time and effort required to set up displays. The mounts are pre-assembled, facilitating quick installations with minimal tools needed.

In conclusion, the Chief Manufacturing PLP Series stands out for its combination of strength, versatility, and user-friendly features. With its advanced technologies, thoughtful design, and flexibility, this series addresses the demanding needs of modern display mounting, making it a preferred choice for professionals in various sectors. As businesses and institutions continue to prioritize high-quality visual communication, the PLP Series is poised to deliver reliable performance, ensuring that displays are optimally positioned for any audience.
Top Page Image Contents