Cino MP3200 Loading the Media Roll ,

Getting Started
Loading the Media Roll
The MP3200(BT) is designed to print either receipt or label.
Please decide the printing mode, media type and sensor type
before loading the media roll.
Printing Mode
The MP3200(BT) supports two printing modes : standard (line)
mode and page mode.
 Standard (line) Mode - Default Setting
In this mode, the MP3200(BT) prints data one line at a time.
 Page Mode
In this mode, the MP3200(BT) prints data one page at a time.
Media Type
The following media types can be applied to MP3200(BT) :
 Continuous Receipt
 I-Mark Media (detected by reflective sensor)
 Gap Label (detected by transmissive sensor)
Sensor Type
Both transmissive sensor and reflective sensor are available for
page mode only :
 Transmissive Sensor
This sensor is used to detect the different transmissive ratio
between label and liner.
 Reflective Sensor
This sensor is used to detect the different reflective ratio
between media and I-Mark (black mark).
5
MP3200 User’s Guide