Using Your MP3200
Establish Bluetooth Connection Generally speaking, Widcomm provides complete Windows®
based Bluetooth software and its stacks have been broadly
adopted by the Bluetooth industry. The following procedure of
installation example describes how to connect MP3200BT with a
host laptop in Windows 2000 using Widcomm Bluetooth driver
for reference. The installation procedure may vary with each
different remote Bluetooth host system, operating system and
Bluetooth driver. You have to follow the respective procedure to
build the connection accordingly.
(1) Make sure the battery pack is fully charged. You may refer
to “Charging the Battery” for details.
(2) Power on the remote Bluetooth host laptop and make sure
the virtual COM port is available for connecting to
MP3200BT. If the virtual COM port is not available, please
follow the steps indicated below to add an additional COM
port :
a. Select the Client Application tab from the Bluetooth
configuration panel.
b. Click the Add COM Port button.
c. Click OK.
(3) Power on MP3200BT within the radio range. The LED
indictors flash 5 times to indicate the battery status firstly.
Following the battery status indication, the LED1 indicator of
MP3200BT will flash red at 2 seconds intervals. The
MP3200BT is now ready to be connected.
(4) Execute the Bluetooth Discovery procedure from the remot e
Bluetooth host laptop by following the steps indicated
below :
a. Right-click the Bluetooth icon at the taskbar, then select
Explore My Bluetooth Places from the shortcut menu.
b. Double-click the Find Bluetooth Device.
c. Check whether “MP3200BT-xxxx” is shown among the
list of the discovered devices in the host laptop (xxxx is
the last four numbers of the Bluetooth address).
(5) Establish the radio link between MP3200BT and the remote
Bluetooth host laptop by following the steps indicated
below :
a. Double-click MP3200BT-xxxx, you will find CINO SPP on
MP3200BT-xxxx service in the Bluetooth host laptop.
16
MP3200 User’s Guide