Cisco Systems 10700 manual Viewing the Module Performance Window, 5-10

Chapter 5 Managing Modules

Module Performance

Note Performance logging can also be started on a per module (GRP) or physical interface basis. For details on how to start performance logging for a selected module (GRP), refer to the “Module Performance” section on page 5-9. For details on how to start performance logging for a selected physical interface (such as Ethernet, ATM, or DS-3), refer to the “Starting Performance Logging for a Selected Interface” section on page 10-6.

Selecting a module provides performance data for the selected module. The values displayed relate to CPU performance, so modules without a CPU display the same value as the CPU card in the chassis.

The Module Performance section provides the following information:

•Viewing the Module Performance Window

•Starting or Stopping Performance Logging

•Module Performance Window—Detailed Description

Viewing the Module Performance Window

Note The Module performance window can be launched from the chassis level. Please note that this window cannot be launched from the module level.

To view the Module Performance window, proceed as follows:

Step 1 Right click on the chassis object and select the Performance>Module>Performance option. Refer to Table 5-2 on page 5-2for information on which objects allow you to launch the Module Performance window. The Module Performance window appears, with the Performance tab displayed:

Cisco 12000/10700 v3.1 Router Manager User Guide

5-10 OL-3865-01