Chapter 5 Managing Modules
Module Configuration
Decommissioning a GRP card also decommissions all interfaces under that GRP card.
To decommission a module, proceed as follows:
Step 1 Open the Configuration window. Refer to the “Viewing the Configuration Window” section on page
Step 2 Choose a Chassis and Module from the list boxes displayed at the left of the window.
Step 3 Choose Decommission to decommission the selected module. An Action Report window appears confirming that the decommissioning action was completed successfully.
Figure 5-3 Action Report Window
Step 4 Choose Close to close the Action Report window.
The selected module is now decommissioned. Decommissioning a GRP or any supporting module initiates the following activities:
•Heartbeat polling stops on the object
•The state is changed to decommissioned
•Status data is no longer available
•Performance polling stops on the module (if enabled)
Decommissioning a line card initiates the following activities:
•All interfaces and ATM connections on the line card are also decommissioned
•Heartbeat polling stops on the line card and interfaces
•The line card, interfaces, and ATM connections are placed in the decommissioned state
•Status data is no longer available on the line card and interfaces
Cisco 12000/10700 v3.1 Router Manager User Guide
| ||
|
