Cisco Systems 10700 manual Module Performance, Module Fault Management Window-Detailed Description

Chapter 5 Managing Modules

Module Performance

Module Fault Management Window—Detailed Description

The Module Fault Management window displays a single Fault Management tab. The Fault Management tab displays two areas: Module Availability and Cisco Contact Details.

Note The details related to the modules are available only if the module is in a managed state.

Module Availability

The Module Availability area contains the following fields:

•Up Time—Displays the time after the network portion of the system was last re-initialized for the selected module.

•Free Memory—Displays the memory space (in bytes) currently unused by the selected GRP module.

•Last Restart Reason—Displays the reason for the system being re-initiated for the selected GRP module.

•Last Authentication Failure Address—Displays the last authorization failure IP address for the selected module.

•Operational Status—Displays the current operational status of the selected GRP module. Possible values are:

–Up—Module is recognized by the device and is operational.

–Down—Module is not recognized by the device or not enabled for operation.

–Standby—Module is enabled and is acting as standby. This value is only applicable for redundant GRPs.

Cisco Contact Details

The Cisco Contact Details area provides Cisco contact details.

Module Performance

The Module Performance window displays the current performance information for the selected GRP module.

Note You can select multiple Modules from the Module object selector list. Selecting multiple modules allows you to start or stop performance logging for all of the selected modules simultaneously. You can choose multiple modules in a list by holding down the Shift key and then selecting the first and last module in the list. You can choose multiple individual modules by holding down the Ctrl key and clicking on the individual modules.

The Module Performance tab displays CPU Usage information and allows you to Start or Stop performance logging for one or more selected modules.

Cisco 12000/10700 v3.1 Router Manager User Guide

OL-3865-01 5-9