Cisco Systems 10700 manual Viewing the Module Fault Management Window

Chapter 5 Managing Modules

Module Fault Management

Module Fault Management

The Module Fault Management window is a read-only window and provides fault information for a selected module. You do not need to enter any information into any of the fields. This section provides the following information:

•Viewing the Module Fault Management Window

•Module Fault Management Window—Detailed Description

Viewing the Module Fault Management Window

To view the Module Fault Management window, proceed as follows:

Step 1 Right click on a module and select the Cisco 12000/10720 Manager>Fault>Module Fault Management option. Refer to Table 5-2 on page 5-2for information on which objects allow you to launch the Module Fault Management window. The Module Fault Management window appears, with the Fault Management tab displayed:

Figure 5-4 Module Fault Management Window

Step 2 Choose a Chassis and Module from the list boxes at the left of the window. The fault management information for the selected module appears. For detailed information on the areas within this tab, refer to the “Module Fault Management Window—Detailed Description” section on page 5-9.

Cisco 12000/10700 v3.1 Router Manager User Guide

5-8 OL-3865-01