MPLS LDP Autoconfiguration

Table 4

Feature Information for MPLS LDP Autoconfiguration

 

 

 

 

 

Feature Name

 

Releases

Feature Information

 

 

 

MPLS LDP Autoconfiguration

12.0(30)S 12.0(32)SY

This feature enables you to

 

 

12.2(28)SB 12.2(33)SRB

globally configure LDP on every

 

 

12.3(14)T 15.0(1)M

interface associated with a

 

 

12.2(33)XNE

specified Interior Gateway

 

 

 

Protocol (IGP) instance.

In Cisco IOS Release 12.0(30)S, this feature was introduced with support for OSPF.

In Cisco IOS Release 12.0(32)SY, support for IS-IS was added.

This feature was integrated into Cisco IOS Release 12.2(28)SB with support for OSPF.

This feature was integrated into Cisco IOS Release 12.2(33)SRB.

This feature was integrated into Cisco IOS Release 12.3(14)T with support for OSPF.

In Release 15.0(1)M, support for IS-IS was added.

This feature was integrated into Cisco IOS Release 12.2(33)XNE with support for IS-IS on the Cisco 10000 series router.

The following commands were modified: mpls ldp autoconfig,

mpls ldp igp autoconfig, show isis mpls ldp, and show mpls ldp discovery.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

MPLS LDP Configuration Guide, Cisco IOS Release 12.4

64

Page 70
Image 70
Cisco Systems 12.4 manual Feature Information for Mpls LDP Autoconfiguration

12.4 specifications

Cisco Systems has consistently been at the forefront of networking technology, and one of its notable software releases is IOS version 12.4. This version introduced significant enhancements and features that continue to influence networking practices. IOS 12.4 was specifically designed to accommodate the growing demands of network reliability, scalability, and advanced functionalities.

One of the primary characteristics of IOS 12.4 is its enhanced security features. The version integrates advanced security protocols, including improvements in IPsec, which allows for secure communication across potentially insecure networks. Additionally, it supports firewall technologies and access control lists (ACLs), ensuring that organizations can implement stringent security measures tailored to their traffic requirements.

Another defining feature of IOS 12.4 is its support for IPv6. As the internet continued to grow, the need for expanded address space became critical. With IOS 12.4, Cisco provided robust capabilities for transitioning from IPv4 to IPv6, ensuring that network managers could adopt the newer standard without sacrificing performance or reliability. This included support for routing protocols and other networking functions that were essential in an IPv6 environment.

Performance improvements were also a key aspect of IOS 12.4. The release optimized routing protocols, including Enhanced Interior Gateway Routing Protocol (EIGRP) and Open Shortest Path First (OSPF), to enhance convergence times and reduce latency. This effectively contributed to improved network efficiency and uptime.

Cisco also included advanced Quality of Service (QoS) capabilities in IOS 12.4, allowing organizations to prioritize critical traffic. Features such as class-based weighted fair queuing and low-latency queuing became invaluable for organizations requiring seamless voice and video communications over IP networks. This focus on QoS demonstrated Cisco's understanding of the growing importance of multimedia applications in modern business environments.

With a set of stable and scalable routing features, IOS 12.4 supports a variety of platforms, enabling businesses to deploy it across different networking hardware to suit their needs. The modularity of this IOS version makes it flexible for various applications, from small business networks to large enterprise systems.

In summary, Cisco Systems' IOS 12.4 brought forth a wealth of features aimed at enhancing security, performance, and flexibility. Through improved routing capabilities, strong IPv6 support, and advanced QoS features, this version laid the foundation for many of the networking principles that organizations still utilize today.