Cisco Systems 2100 quick start http//ipaddress/config/login.html, Run the Setup Program continued

Run the Setup Program (continued)

Verify Configuration Registrar is Running

Once the system has been installed and configured, you can verify the installation of the Configuration Registrar by following these steps:

Step 1 Go to a different computer and bring up a web browser.

Step 2 On the net-site window enter the URL for the Configuration Registrar.

For example:

http://<ip_address>/config/login.html

where: ip_address is the IP address you entered during IE2100 Series setup.

The Configuration Registrar login page appears.

If you have reached the Configuration Registrar Home page, you have verified the successful installation on the Configuration Registrar.

7

Step 3 Enter the Configuration Registrar Userid and Password that you entered during IE2100 Series setup.

Step 4 On the message page, click Continue.