3-5
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
78-6286-05
Chapter3 Installing the Switch Preparing for Installation
ESD wrist strap
Mounting kit
Catalyst 2948G-GE-TX Switches
The Catalyst 2948G-GE-TX switch is ship ped wit h thes e ite ms:
This hardware guide
About the Catalyst 2948G Documentation flyer
AC power cord
One RJ-45-to-DB-9 adapter cable (78-3383-XX)
Mounting kit containing:
Four rubber feet for mounting the switch on a table (51-0089)
Two 19-inch rack-mounting brackets (700-08209-XX)
Four Phillips machine screws for attaching the brackets to a rack
(48-0655-XX)
One cable guide (700-05613-XX)
One black Phillips machine screw for attaching the cable guide to one of
the mounting brackets (48-0654-XX)
One Redundant Power System (RPS) connector cover for wall mounting
(700-16465-XX)
Two Phillips pan-head screws for attaching the RPS cover (48-0482-XX)
Four Phillips truss-head screws for attaching wall-mounting brackets
(48-0656-XX)
Four Phillips pan-head screws for attaching the switch to a rack
(48-0523-XX)