Chapter3 Installing the Switch
Installing the Catalyst 2948G-GE-TX Switch
3-16
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
78-6286-05
Wall-Mounting the Catalyst 2948G-GE-TX Switch
To install the Catalyst 2948G-GE-TX switch on a wall, follow the instructions in
these procedures:
Attaching the Brackets to the Switch for Wall-Mounting, page16
Attaching the RPS Connector Cover, page 17
Mounting the Switch on a Wall, page17

Attaching the Brackets to the Switch for Wall-Mounting

Figure 3-12 shows how to attach a 19-inch bracket to one side of the switch.
Follow the same steps to attach the second bracket to the opposite side of the
switch.
Figure3-12 Attaching the 19-Inch Brackets for Wall-Mounting
1Phillips truss-head screws
98667
1