9-2
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
OL-10101-02
Chapter 9 Configuring IEEE 802.1x Port-Based Authentication
Understanding IEEE 802.1x Port-Based Authentication
Using IEEE 802.1x Authentication with VLAN Assignment, page 9-7
Using IEEE 802.1x Authentication with Guest VLAN, page 9-8
Using IEEE 802.1x Authentication with Restricted VLAN, page 9-9
Using IEEE 802.1x Authentication with Voice VLAN Ports, page 9-10
Using IEEE 802.1x Authentication with Port Security, page 9-10
Using IEEE 802.1x Authentication with Wake-on-LAN, page 9-11
Network Admission Control Layer 2 IEEE 802.1x Validation, page 9-11
Device Roles
With IEEE 802.1x port-based authentication, the devices in the network have specific roles as shown in
Figure 9-1.
Figure 9-1 IEEE 802.1x Device Roles
Client—the device (workstation) that requests access to the LAN and switch services and responds
to requests from the switch.The workstation must be running IEEE 802.1x-compliant client software
such as that offered in the Microsoft Windows XP operating system. (The client is the supplicant in
the IEEE 802.1x standard.)
Note To resolve Windows XP network connectivity and IEEE 802.1x authentication issues, read
the Microsoft Knowledge Base article at this URL:
http://support.microsoft.com/support/kb/articles/Q303/5/97.ASP
Authentication server—performs the actual authentication of the client. The authentication server
validates the identity of the client and notifies the switch whether or not the client is authorized to
access the LAN and switch services. Because the switch acts as the proxy, the authentication service
is transparent to the client. In this release, the RADIUS security system with Extensible
Authentication Protocol (EAP) extensions is the only supported authentication server. It is available
in Cisco Secure Access Control Server Version 3.0 or later. RADIUS operates in a client/server
model in which secure authentication information is exchanged between the RADIUS server and
one or more RADIUS clients.
Switch (edge switch or wireless access point)—controls the physical access to the network based on
the authentication status of the client. The switch acts as an intermediary (proxy) between the client
and the authentication server, requesting identity information from the client, verifying that
101229
Workstations
(clients)
Authentication
server
(RADIUS)