Cisco Active Network Abstraction Administrator’s Guide, 3.5
Page 94 Cisco Systems, Inc.
6.8.2 SNMP Tab The SNMP tab enables the user to support polling and accessing devices
using SNMPv1, SNMPv2 and SNMPv3. Selecting the SNMP tab displays
the following dialog box:
The following checkbox and radio buttons are displayed in the SNMP tab of
the New VNE dialog box:
• Enable SNMP: Check this option to enable the SNMP communication
protocol so that the user can work with it.
Note: A VNE can be SNMP enabled or disabled at any time, however,
when the Auto Detect option is selected in the General tab, it cannot be
disabled. (For more information, refer to the General tab section on page
92).
• SNMP V1: Select SNMP version 1.
• SNMP V2: Select SNMP version 2.
• SNMP V3: Select SNMP version 3.
Note: The SNMP V3 Settings area is only enabled when SNMP
Version 3 is selected.