Cisco Systems 3.5 A.3 Executing a Command on all Sheer DNA Units

Cisco Active Network Abstraction Administrator’s Guide, 3.5
Page 156 Cisco Systems, Inc.
Restarting a machine may cause some of the VNEs running on the machine
to be reported as unreachable. This is due to handshake protocols with the
Sheer DNA Unit that will fail due to the unavailability of the VNEs.
Restarting a machine will abort all active queries, flows and transactions that
are currently being executed within the VNEs that run on the restarted Sheer
DNA Unit.
To restart a Sheer DNA Unit
1. Open a Telnet session to the Sheer DNA Unit machine and login to the
machine.
2. Execute the script:
~sheer/Main/mvm.csh
A.3 Executing a Command on all Sheer DNA Units
The script rall.csh is a utility used to execute a given command on all of the
Sheer DNA Units (not on the Sheer DNA Gateway).
~sheer/Main/rall.csh <script>
Where <script> is the script name.
The script example below will restart all the Sheer DNA Units (not the Sheer
DNA Gateway).
~sheer/Main/rall.csh mvm.csh