Cisco Active Network Abstraction Administrator’s Guide, 3.5
Page 118 Cisco Systems, Inc.
• System: Sets the polling rate for system-related information, such as
device name, device location and so on.
The following fields are displayed in the Topology area:
• Layer 1: Sets the polling rate of the topology process as an interval
for the Layer 1 counter. This is an ongoing process.
• Layer 2: Sets the polling rate of the topology process as an interval
for the Layer 2 counter. This is process is available on demand.
6. Define the new polling groups’ properties.
7. Click OK. The new polling group is displayed in the Workspace.
The new polling group can be used when defining a new VNE. For more
information, refer to the section Defining VNEs on page 89.
7.4.3 Modifying a Polling Group Sheer DNA Manage enables the user to modify a polling group and view
polling group properties.
To modify a polling group
1. Select the Polling Groups sub-branch in the Sheer DNA Manage
window’s Tree pane. The Polling Groups table is displayed in the
Workspace.
2. Right-click the required polling group in the Workspace to display the
shortcut menu, and select Properties or, from the File menu select
Properties or in the toolbar click Properties. The Update Polling Group
dialog box is displayed.
For more information on the fields displayed in the Update Polling
Group dialog box, refer to page 117.
3. Edit the properties of the polling group as required.
Note: If any VNE is using this polling group then a warning message is
displayed.
4. Click Apply.
5. Click OK. The polling group’s settings are modified accordingly.
Note: Modifying the polling group settings affects all of the VNEs and
devices using the selected polling group.