Cisco Active Network Abstraction Administrator’s Guide, 3.5
Page 96 Cisco Systems, Inc.
6.8.3 Telnet / SSH Tab The Telnet / SSH tab enables the user to define the Telnet command
sequence and support SSH for device access (reachability) and investigation.
Selecting the Telnet / SSH tab displays the following tabbed dialog box:
The following checkbox is displayed in the Telnet / SSH tab of the New VNE
dialog box:
• Enable: Check this option to enable the Telnet/SSH1 communication
protocol to be used by the VNE to investigate the reachability of the
device by activating the Prompt and Run fields, and the Add/Remove
command buttons.
Note: A VNE can be Telnet / SSH enabled or disabled at any time.
The following fields are displayed in the Telnet / SSH tab of the New VNE
dialog box:
• Protocol: A dropdown list of the available protocols, namely:
• Telnet: By default this option is set to Telnet. When Telnet is
selected the Port field automatically displays 23.