Cisco Systems 3032, 3130

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide

OL-14317-01

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide

Configuring the Switch

Figure 5 Connecting To the Switch Console Port

Step 2 Start the terminal emulation session so that you can see the output display from

the power-on self-test (POST). The terminal-emulation software—a PC

application such as Hyperterminal or ProcommPlus—makes communication

between the switch and your PC or terminal possible.

Configure the baud rate and character format of the PC or terminal to match these

console port default characteristics:

•9600 baud

•8 data bits

•1 stop bit

•No parity

•None (flow control)

Step 3 Go to the “Waiting for POST to Complete” section on page 15 to finish

configuring the switch.

WS-CBS3130X-S

MODE

CONSOLE

250202

Contents

Main Contents Taking Out What You Need Switch Description Page Page Dell Modular Server Chassis Architecture Dell Modular Server Chassis Architecture The six chassis I/O module bays are on the rear panel (see Figure 2). Figure 2 Dell Modular Server Chassis Rear Panel Installation Warning Statements Installing the Switch in the Server Chassis Page Installing the Switch in the Server Chassis Step 6 Ensure that the release latch on the switch is in the open position or perpendicular to the module (see Figure 3): Figure 3 Release Latch in Open Position Installing the Switch in the Server Chassis Figure 4 shows the switch being inserted into the server chassis. Figure 4 Inserting the Switch into the Server Chassis 1Switch 3Release latch 2Server chassis Configuring the Switch Connecting through the Switch Console Port Page Connecting through the DRAC/MC Waiting for POST to Complete Completing the Initial Configuration Page Step 10 These choices appear: Make your selection, and press Return. Configuring the Switch Stack Master Managing the Switch Using the CLI Using the Device Manager Page Other Management Options Planning and Creating a Switch Stack (Only 3130G-S and 3130X-S Switches) Page Stack Cabling Configuration Example Connecting the StackWise Plus Cables Connecting to the Switch Ports Connecting to 10/100/1000 Ports Installing and Connecting to Devices in the 10-Gigabit Ethernet Slots Verify Port Connectivity In Case of Difficulty Troubleshooting Initial Configuration Setup Resetting the Switch Configuration Accessing Help Online For More Information Obtaining Documentation, Obtaining Support, and Security Guidelines Hardware Warranty Terms Dell Hardware Warranty Terms Cisco 90-Day Limited Hardware Warranty Terms