Manuals / Brands / Computer Equipment / Switch / Cisco Systems / Computer Equipment / Switch

Cisco Systems 3032, 3130 Installing and Connecting to Devices in the 10-Gigabit Ethernet Slots

1 34

Download 34 pages, 872.14 Kb

27

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide

OL-14317-01

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide

Connecting to the Switch Ports

Installing and Connecting to Devices in the 10-Gigabit Ethernet Slots

The switch 10-Gigabit Ethernet module slots are used for connections to other

switches and routers. The module slots operate in full-duplex mode and use the

hot-swappable Cisco X2 transceiver modules and the Cisco TwinGig Converter

Module. The X2 transceiver modules have SC connectors to connect to multimode

fiber (MMF) and single-mode fiber (SMF) cables. The Cisco converter modules

have two SFP-module slots that convert the 10-Gigabit interface into a dual SFP

module interface.

Figure 9 shows how to install an X2 transceiver module into the 10-Gigabit port.

Figure 9 Installing an X2 Transceiver Module

Use only Cisco X2 transceiver modules, Cisco converter modules, and Cisco SFP

modules with the switch. Each Cisco module has an internal serial EEPROM that

is encoded with security information. This encoding provides a way for Cisco to

identify and validate that the module meets the requirements for the switch.

250309

STK

BA

17X

18X

19X

20X

X2-1

21

22

X2-2

23

24

Contents

Main Contents Taking Out What You Need Switch Description Page Page Dell Modular Server Chassis Architecture Dell Modular Server Chassis Architecture The six chassis I/O module bays are on the rear panel (see Figure 2). Figure 2 Dell Modular Server Chassis Rear Panel Installation Warning Statements Installing the Switch in the Server Chassis Page Installing the Switch in the Server Chassis Step 6 Ensure that the release latch on the switch is in the open position or perpendicular to the module (see Figure 3): Figure 3 Release Latch in Open Position Installing the Switch in the Server Chassis Figure 4 shows the switch being inserted into the server chassis. Figure 4 Inserting the Switch into the Server Chassis 1Switch 3Release latch 2Server chassis Configuring the Switch Connecting through the Switch Console Port Page Connecting through the DRAC/MC Waiting for POST to Complete Completing the Initial Configuration Page Step 10 These choices appear: Make your selection, and press Return. Configuring the Switch Stack Master Managing the Switch Using the CLI Using the Device Manager Page Other Management Options Planning and Creating a Switch Stack (Only 3130G-S and 3130X-S Switches) Page Stack Cabling Configuration Example Connecting the StackWise Plus Cables Connecting to the Switch Ports Connecting to 10/100/1000 Ports Installing and Connecting to Devices in the 10-Gigabit Ethernet Slots Verify Port Connectivity In Case of Difficulty Troubleshooting Initial Configuration Setup Resetting the Switch Configuration Accessing Help Online For More Information Obtaining Documentation, Obtaining Support, and Security Guidelines Hardware Warranty Terms Dell Hardware Warranty Terms Cisco 90-Day Limited Hardware Warranty Terms