Manuals / Brands / Computer Equipment / Switch / Cisco Systems / Computer Equipment / Switch

Cisco Systems 3032, 3130 Configuring the Switch Stack Master

1 34

Download 34 pages, 872.14 Kb

19

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide

OL-14317-01

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide

Configuring the Switch

Step 11 Disconnect the server chassis serial port or the switch console port from the PC.

See the “Managing the Switch” section on page 20 for information about

configuring and managing the switch.

If you need to rerun the initial configuration dialog, see the “Resetting the Switch

Configuration” section on page 29.

Configuring the Switch Stack Master

If you plan to create a switch stack, we recommend that you set the first

configured switch as the stack master. To do this, you must assign the highest

priority value to that switch. To assign a priority value after you have installed and

initially configured the first switch, follow these steps:

Step 1 Launch a Telnet session.

Step 2 Enter enable.

Step 3 Enter configure terminal.

Step 4 Enter switch 1 priority 15.

Step 5 At the prompt, press Return.

Step 6 Enter end to exit this mode.

Step 7 Enter copy running-configuration startup-configuration to save this setting.

Step 8 At the prompt, press Return.

Step 9 To verify that this switch is set as the master, enter the show switch user EXEC

command.

For more information about creating switch stacks, see the “Planning and

Creating a Switch Stack (Only 3130G-S and 3130X-S Switches)” section on

page 22.

Contents

Main Contents Taking Out What You Need Switch Description Page Page Dell Modular Server Chassis Architecture Dell Modular Server Chassis Architecture The six chassis I/O module bays are on the rear panel (see Figure 2). Figure 2 Dell Modular Server Chassis Rear Panel Installation Warning Statements Installing the Switch in the Server Chassis Page Installing the Switch in the Server Chassis Step 6 Ensure that the release latch on the switch is in the open position or perpendicular to the module (see Figure 3): Figure 3 Release Latch in Open Position Installing the Switch in the Server Chassis Figure 4 shows the switch being inserted into the server chassis. Figure 4 Inserting the Switch into the Server Chassis 1Switch 3Release latch 2Server chassis Configuring the Switch Connecting through the Switch Console Port Page Connecting through the DRAC/MC Waiting for POST to Complete Completing the Initial Configuration Page Step 10 These choices appear: Make your selection, and press Return. Configuring the Switch Stack Master Managing the Switch Using the CLI Using the Device Manager Page Other Management Options Planning and Creating a Switch Stack (Only 3130G-S and 3130X-S Switches) Page Stack Cabling Configuration Example Connecting the StackWise Plus Cables Connecting to the Switch Ports Connecting to 10/100/1000 Ports Installing and Connecting to Devices in the 10-Gigabit Ethernet Slots Verify Port Connectivity In Case of Difficulty Troubleshooting Initial Configuration Setup Resetting the Switch Configuration Accessing Help Online For More Information Obtaining Documentation, Obtaining Support, and Security Guidelines Hardware Warranty Terms Dell Hardware Warranty Terms Cisco 90-Day Limited Hardware Warranty Terms