Cisco Systems 3631, 2691 Reinstalling the Cover on a Cisco Router, Chassis. See , , or Figure

March 2002

Internal CompactFlash Memory Card Installation and Removal

Figure 14 Installing the Front Panel on a Cisco 3745 Router

62782

Hinges

2

Access door

1

Front panel

Reinstalling the Cover on a Cisco Router

	Caution	Before reinstalling the cover on the router, make sure that all cables are secured, and are not in danger
		of being pinched or cut.
		This section describes how to reinstall the router cover. You need a number 2 Phillips screwdriver or flat
		blade screwdriver to complete this procedure:
	Step 1	Place the chassis on a flat surface.
	Step 2	Hold the cover at a 45-degree angle, and insert the tabs into the slots along the front (bezel) edge of the
		chassis. (See Figure 15, Figure 16, or Figure 17.)
	Step 3	Center the cover over the chassis and lower it onto the chassis.
	Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards
16		78-13892-03