Cisco Systems 2691, 3631 manual Removing an Internal CompactFlash Memory Card

March 2002

Internal CompactFlash Memory Card Installation and Removal

Figure 12 Removing the Cover from a Cisco 3725

2

1

62488

1

Lift cover

2

Slide cover

Removing an Internal CompactFlash Memory Card

Cisco 2691 routers, Cisco 3631 routers, and Cisco 3700 series routers have an internal connector on the CPU/mainboard that may hold a CompactFlash memory card.

After removing the plug-in CPU/mainboard or the chassis cover as described in the “Removing a Plug-in CPU/Mainboard” section on page 7 or in the “Removing the Chassis Cover” section on page 9, complete the following steps to remove an internal CompactFlash memory card from the router:

Step 1 Locate the CompactFlash memory card on the CPU/mainboard. (See Figure 4, Figure 5, Figure 6, or Figure 7.)

Step 2 If there is a retention screw, remove it from the standoff, using the Phillips screwdriver; save the retention screw for reinstallation.

Step 3 Carefully pull the CompactFlash memory card free from the connector.

Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards

78-13892-03 13