Cisco Systems 4100 manual Connecting the Service Port Interfaces

Installation and Configuration

Connecting the Service Port Interfaces

Figure 5 External Equipment Connections to the Controller

Optional

management network

10/100BASE-T

Two 1000BASE-SX

CLI

console

Network

Cisco 1000

access points

network

Cisco Wireless control System, Web User Interface, CLI

Service port connections

Serial console connection

Distribution system connections

Cisco wireless control system, Web User Interface, CLI

Access point connections

142200

Connecting the Service Port Interfaces

After connecting the network (Distribution System) to the controller as described in “ Connecting the Network (Distribution System),” you can make Cisco Wireless Control System, Web User Interface, or CLI console (management interface) connections to the controller in any one of the following ways.

•You can connect any of the Cisco Wireless Control System, Web User Interface, or CLI console directly to the secure front-panel Service Port.

•You can connect any or all of the Cisco Wireless Control System, Web User Interface, or CLI console through a dedicated management network directly to the front-panel Service port.

Refer to the following figures when connecting the Cisco Wireless Control System, Web User Interface, and/or CLI console to the controller.

Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide

78-17155-01 13