Chapter 7 Provisioning: Configuring QoS for IP Telephony
Configuring QoS Using the IP Telephony Wizard
If QPM recognizes that the neighboring switch has Layer 3 QoS capabilities, it will trust DSCP from the Layer 3 switch. If there is no neighboring switch (or if the switch is of unknown type), QPM will configure QoS for a Layer 2 device.
To select IntraLAN connections:
Step 1 Select the switch interfaces on which to configure QoS for the LAN connections in the network, by selecting the check boxes next to the appropriate interfaces in the selection table.
For more information about the columns in this table, see IP Telephony Wizard: Select IntraLAN Connections Page, page
Step 2 To remove any interfaces that were previously assigned for this voice role:
a.Click the Remove button in the Advanced section of the page.
A page appears, displaying the network elements assigned for the IntraLAN voice role.
For more information about this page, see IP Telephony Wizard: Remove Network Elements Page, page
b.Select the interfaces you want to unassign and click Remove.
The page closes.
Step 3 Click Next.
If the Display Configuration Info. check box is selected, the Configuration Info page appears. After reviewing the assignments summary, click Next.
The voice policy groups and your LAN interfaces assignments will be saved, and the next configuration step of the wizard appears (Selecting Voice VLAN Connections).
Related Topics
•Using QPM Tables, page
•Using the IP Telephony Wizard, page
•Viewing Policy Information, page
Selecting Voice VLAN Connections
Since the IP phone ports are configured to use an auxiliary voice VLAN on the switches, and the QoS style on the IP phone ports is set to
In this step, the wizard configures
User Guide for CiscoWorks QoS Policy Manager 4.1.6
|
| |
|